Sensirion SEN63C I2C Python Driver

This package contains the driver for a Sensirion SEN63C sensor. It provides a hardware-independent interface which works with various I2C transceivers.

Contents

• Installation
• Quick Start
  • Execute measurements with SensorBridge
    • Example script
  • Execute measurements using internal Linux I²C driver
    • Example script
• Development
  • Run tests
  • Build documentation
• API Documentation
  • SEN63C
    • Sen63cDevice
      • Sen63cDeviceBase
        • Sen63cDeviceBase.__init__()
        • Sen63cDeviceBase.channel
        • Sen63cDeviceBase.start_continuous_measurement()
        • Sen63cDeviceBase.stop_measurement()
        • Sen63cDeviceBase.get_data_ready()
        • Sen63cDeviceBase.read_measured_values_as_integers()
        • Sen63cDeviceBase.read_number_concentration_values_as_integers()
        • Sen63cDeviceBase.read_measured_raw_values()
        • Sen63cDeviceBase.start_fan_cleaning()
        • Sen63cDeviceBase.set_temperature_offset_parameters()
        • Sen63cDeviceBase.set_temperature_acceleration_parameters()
        • Sen63cDeviceBase.perform_forced_co2_recalibration()
        • Sen63cDeviceBase.set_co2_sensor_automatic_self_calibration()
        • Sen63cDeviceBase.get_co2_sensor_automatic_self_calibration()
        • Sen63cDeviceBase.set_ambient_pressure()
        • Sen63cDeviceBase.get_ambient_pressure()
        • Sen63cDeviceBase.set_sensor_altitude()
        • Sen63cDeviceBase.get_sensor_altitude()
        • Sen63cDeviceBase.activate_sht_heater()
        • Sen63cDeviceBase.get_sht_heater_measurements()
        • Sen63cDeviceBase.get_product_name()
        • Sen63cDeviceBase.get_serial_number()
        • Sen63cDeviceBase.get_version()
        • Sen63cDeviceBase.read_device_status()
        • Sen63cDeviceBase.read_and_clear_device_status()
        • Sen63cDeviceBase.device_reset()
      • Sen63cDevice
        • Sen63cDevice.sen63c
        • Sen63cDevice.__init__()
        • Sen63cDevice.read_measured_values()
        • Sen63cDevice.read_number_concentration_values()
    • Commands
      • DeviceStatus
        • DeviceStatus.reserved1
        • DeviceStatus.fan_error
        • DeviceStatus.reserved2
        • DeviceStatus.rht_error
        • DeviceStatus.reserved3
        • DeviceStatus.reserved4
        • DeviceStatus.reserved5
        • DeviceStatus.reserved6
        • DeviceStatus.pm_error
        • DeviceStatus.co2_1_error
        • DeviceStatus.reserved7
        • DeviceStatus.fan_speed_warning
      • StartContinuousMeasurement
        • StartContinuousMeasurement.CMD_ID
        • StartContinuousMeasurement.pack()
        • StartContinuousMeasurement.tx
      • StopMeasurement
        • StopMeasurement.CMD_ID
        • StopMeasurement.pack()
        • StopMeasurement.tx
      • GetDataReady
        • GetDataReady.CMD_ID
        • GetDataReady.pack()
        • GetDataReady.tx
        • GetDataReady.rx
      • ReadMeasuredValuesAsIntegers
        • ReadMeasuredValuesAsIntegers.CMD_ID
        • ReadMeasuredValuesAsIntegers.pack()
        • ReadMeasuredValuesAsIntegers.tx
        • ReadMeasuredValuesAsIntegers.rx
      • ReadNumberConcentrationValuesAsIntegers
        • ReadNumberConcentrationValuesAsIntegers.CMD_ID
        • ReadNumberConcentrationValuesAsIntegers.pack()
        • ReadNumberConcentrationValuesAsIntegers.tx
        • ReadNumberConcentrationValuesAsIntegers.rx
      • ReadMeasuredRawValues
        • ReadMeasuredRawValues.CMD_ID
        • ReadMeasuredRawValues.pack()
        • ReadMeasuredRawValues.tx
        • ReadMeasuredRawValues.rx
      • StartFanCleaning
        • StartFanCleaning.CMD_ID
        • StartFanCleaning.pack()
        • StartFanCleaning.tx
      • SetTemperatureOffsetParameters
        • SetTemperatureOffsetParameters.CMD_ID
        • SetTemperatureOffsetParameters.pack()
        • SetTemperatureOffsetParameters.tx
      • SetTemperatureAccelerationParameters
        • SetTemperatureAccelerationParameters.CMD_ID
        • SetTemperatureAccelerationParameters.pack()
        • SetTemperatureAccelerationParameters.tx
      • PerformForcedCo2Recalibration
        • PerformForcedCo2Recalibration.CMD_ID
        • PerformForcedCo2Recalibration.pack()
        • PerformForcedCo2Recalibration.tx
        • PerformForcedCo2Recalibration.rx
      • SetCo2SensorAutomaticSelfCalibration
        • SetCo2SensorAutomaticSelfCalibration.CMD_ID
        • SetCo2SensorAutomaticSelfCalibration.pack()
        • SetCo2SensorAutomaticSelfCalibration.tx
      • GetCo2SensorAutomaticSelfCalibration
        • GetCo2SensorAutomaticSelfCalibration.CMD_ID
        • GetCo2SensorAutomaticSelfCalibration.pack()
        • GetCo2SensorAutomaticSelfCalibration.tx
        • GetCo2SensorAutomaticSelfCalibration.rx
      • SetAmbientPressure
        • SetAmbientPressure.CMD_ID
        • SetAmbientPressure.pack()
        • SetAmbientPressure.tx
      • GetAmbientPressure
        • GetAmbientPressure.CMD_ID
        • GetAmbientPressure.pack()
        • GetAmbientPressure.tx
        • GetAmbientPressure.rx
      • SetSensorAltitude
        • SetSensorAltitude.CMD_ID
        • SetSensorAltitude.pack()
        • SetSensorAltitude.tx
      • GetSensorAltitude
        • GetSensorAltitude.CMD_ID
        • GetSensorAltitude.pack()
        • GetSensorAltitude.tx
        • GetSensorAltitude.rx
      • ActivateShtHeater
        • ActivateShtHeater.CMD_ID
        • ActivateShtHeater.pack()
        • ActivateShtHeater.tx
      • GetShtHeaterMeasurements
        • GetShtHeaterMeasurements.CMD_ID
        • GetShtHeaterMeasurements.pack()
        • GetShtHeaterMeasurements.tx
        • GetShtHeaterMeasurements.rx
      • GetProductName
        • GetProductName.CMD_ID
        • GetProductName.pack()
        • GetProductName.tx
        • GetProductName.rx
      • GetSerialNumber
        • GetSerialNumber.CMD_ID
        • GetSerialNumber.pack()
        • GetSerialNumber.tx
        • GetSerialNumber.rx
      • GetVersion
        • GetVersion.CMD_ID
        • GetVersion.pack()
        • GetVersion.tx
        • GetVersion.rx
      • ReadDeviceStatus
        • ReadDeviceStatus.CMD_ID
        • ReadDeviceStatus.pack()
        • ReadDeviceStatus.tx
        • ReadDeviceStatus.rx
      • ReadAndClearDeviceStatus
        • ReadAndClearDeviceStatus.CMD_ID
        • ReadAndClearDeviceStatus.pack()
        • ReadAndClearDeviceStatus.tx
        • ReadAndClearDeviceStatus.rx
      • DeviceReset
        • DeviceReset.CMD_ID
        • DeviceReset.pack()
        • DeviceReset.tx
    • Result Types
      • SignalMassConcentrationPm1p0
        • SignalMassConcentrationPm1p0.value
      • SignalMassConcentrationPm2p5
        • SignalMassConcentrationPm2p5.value
      • SignalMassConcentrationPm4p0
        • SignalMassConcentrationPm4p0.value
      • SignalMassConcentrationPm10p0
        • SignalMassConcentrationPm10p0.value
      • SignalNumberConcentrationPm0p5
        • SignalNumberConcentrationPm0p5.value
      • SignalNumberConcentrationPm1p0
        • SignalNumberConcentrationPm1p0.value
      • SignalNumberConcentrationPm2p5
        • SignalNumberConcentrationPm2p5.value
      • SignalNumberConcentrationPm4p0
        • SignalNumberConcentrationPm4p0.value
      • SignalNumberConcentrationPm10p0
        • SignalNumberConcentrationPm10p0.value
      • SignalTemperature
        • SignalTemperature.value
      • SignalHumidity
        • SignalHumidity.value
      • SignalCo2
        • SignalCo2.value